Lime Requirement (SMP)
Slightly Modified Shoemaker-McLean-Pratt (SMP) Single Buffer Method
Reagents
SMP Buffer 鈥 Part A
In 1 liter flask
- Fill one-third the flask with DI water
- 1.8 g p-nitrophenol (HO 路 C6H4NO2)
- 3.0 g potassium chromate (K2CrO4)
- 53.1 g calcium chloride dihydrate (CaCl22H2O)
Shake vigorously.
SMP Buffer 鈥 Part B
In 250 ml flask
- 100 ml DI water
- 2.0 g Calcium acetate (Ca(OAc)2)
Mix until fully dissolved.
Add part B to part A in the 1 liter flask and shake vigorously when they are combined. Place on an orbital shaker for 2 hours.
SMP Buffer 鈥 Part C
In the same 1 liter flask from above
- 2.5 ml triethanolamine (TEA)
Shake mixture periodically until it is completely dissolved.
Adjust to pH 7.50 卤 0.02 with 4 M NaOH or 4 M HCl
Transfer mixture into a 1 liter volumetric flask.
Bring to volume with DI water.
Purge the solution with N2 and store in a dissector. CO2 or water vapor will contaminate the buffer.
Procedure
In a 125 ml sample cup
- 5.2 g Fresh sieved soil
- 10 ml DI water
- 10 ml SMP buffer
Place on orbital shaker (250 rpm) for 10 minutes.
Let sit for 30 minutes.
The times of shaking and standing are of prime importance. Therefore, stagger samples, at most, in sets of six to keep close to these times as possible.
Gently swirl the solution before measuring pH. Record to nearest 0.01 pH unit as soil-buffer pH.
Adapted from Sim (1996) Chapter 17 鈥淟ime Requirement鈥
SSSA Methods of Soil Analysis. Part 3. Chemical Methods
Created: 09/15/10